Category - pumps
Side channel blowers and compressors
- Competent advice
- Long life, reliable industrial quality
- Continuous use
- We also supply for special applications
- Applications
- Special versions (design)
- Special protective coatings
- ATEX versions
Side channel blowers
Side channel blowers consist of an annular, split housing in which an impeller rotates. The blades, passing near the inlet, suck the gaseous medium to be compressed into the side channel blower. The blades accelerate the gas forward and outward. The annular housing diverts the gas and returns it to the base of the following blades. Each of these spiral cycles, which occur many times during one revolution of the impeller, causes the dynamic pressure increase of the gas. At the end of the rotation, the blades push the compressed gas pulsating-free through a narrowed static chamber to the outlet opening. If two channels or impellers are connected in parallel in one unit (RIC TS series), the air flow is as high as possible. If two channels or the rotor are connected in series, a two-stage compression (RIC MD series) is achieved for the highest possible positive or negative pressure
RIC M 30 S – RIC M 120 S (14 models)
Direct flanged, two-pole three-phase asynchronous motor in IE2/IE3 version. Insulation class F – tropically protected and protection class IP55 with bimetallic thermal protection contact.
Single impeller – single stage
Pressure at 50 Hz:
- Minimum Performance: 74 m³/h at 150 mbar.
- Maximum Performance: 1022 m³/h at 450 mbar.
- Minimum Performance: 74 m³/h at 125 mbar.
- Maximum Performance: 1022 m³/h at 350 mbar.
power: 0.37 – 15 kW
Speed: 2900 rpm at 50 Hz
RIC T 150 S – RIC T 120 S (14 models)
Direct flanged, two-pole three-phase asynchronous motor in IE3 version.
Insulation class F – tropically protected and protection class IP55 with bimetallic thermal protection contact.
Double impeller – single stage
Pressure at 50 Hz:
- Minimum Performance: 74 m³/h at 150 mbar.
- Maximum Performance (50 Hz): 1985 m³/h at 400 mbar.
- Maximum Performance (60 Hz): 2395 m³/h at 400 mbar.
- Minimum Performance: 74 m³/h at 125 mbar.
- Maximum Performance: 2395 m³/h at 650 mbar.
power: 0.37 – 18.5 kW
Speed: 2900 rpm at 50 Hz
ATEX certified series
ATEX certified side channel blowers provide effective protection in areas where it is more likely (category 2G) or less likely (category 3GD).
Classification:
CE Ex II 2G c T3 (Zone 1) and CE Ex II 2G/3G c T3 (Zone 2).
Build:
Aluminum housing with optional internal coatings for corrosive media
Protections:
Available with impregnation, anodizing, and special sealing for aggressive gases.
- Aluminum housing, on request with internal coating against corrosive media. Our products are also available with impregnation, sealing, anodizing and special protection devices for aggressive gases. .
- Manuals are available in EN, FR, ES, IT, BP, other languages on request! Step files, CAD files are happy to be sent to you.